I. Brief introduction:
This machine can produce and press all kinds of melamine tableware. Raw materials can be wood, bamboo, corn, chaff, rice straw, corn stalk, bagasse, bamboo powder, saw-dust and some other crops straw and shell. The machine can applique and print on the tableware. The machine can be with high speed mixer, mould, edge grinding machine, etc. Annual output is 4 pcs/min. It also can produce large products. We can make moulds according to customer’s requirements.
II. Working principle:
This machine is composed of main machine, hydraulic control system, electrical instrument and heater etc. The main machine has two parts, upper board and lower board. The hydraulic device is placed on the top of oil tank and the electrical box is on the front. The oil pressure gauge shows the pressure and the pressure switch controls the pressure. The plunger piston presses the mould from fast to slow, then heats by heating device to make the material sulfurization and form. The distance between upper board and lower board can be adjusted by the nut.
III. Features:
(1) The running speed is from fast to slow to reduce the impact of the machine. And the voice is low. It is not easy to damage the mould.
(2) Manual operation and auto operation for choice.
(3) Mould locking F=500 TONS
(4) The oil circuit is designed reasonable, which works quickly and steadily. The valves are adopted famous brand products.
(5) By using high and low pressure way; it can save the energy greatly.
-
IV. Technical parameter
1. Mold clamping force: 5.0MN
2. Working pressure: 210KG/CM2
3. Piston diameter: 600mm
4. Upright space(hot plate area): 900X900mm
5. Route: 550mm
6. Lift height: 750mm
7. Clamp speed: 110mm/s
8. Return speed: 110mm/s
9. Compression speed: ≥3mm/s
10. Upright material: 45#
11. Upright and piston: At least 100 micrometer chromeplate coating
12. Upright and piston: 50 degree rockwell hardness
13. Master cylinder: high grade ductile iron cast
14. Motor: 11KW，Carter
15. Power: 380V,50Hz
16. Heating panel: 85mm，2x12=24kw, resist block
17. Hydraulic component: magnetic valve: HUADE
18. Oil pump: KCL
19. PLC: Mitsubishi
20. Machine weight: About 11000Kg
21. Size: 2400X1500X2870mm
Language selection
